RSGB Centenary PSK31 Receiver

As part of this year’s RSGB centenary celebrations, a PSK31 receiver kit was put together to help encourage kids to delve into construction. The kits were used by local schoolchildren at the RSGB Centenary Event at Bletchley Park in July. That kit is now available for constructors.

RSGB Centenary Construction Event
RSGB Centenary Construction Event in July 2013

What is the project?

It’s a receiver capable of receiving PSK data signals on 20 metres. If you’re interested in construction, then this will allow to to build a low-cost 20m HF receiver, and connect it to a computer’s soundcard to use your computer to display received PSK31 data signals.

Constructing the project

The board and the instructions are available from the RSGB website. Price for the board, plus the 3 20m crystals needed is £6.79 to RSGB members, or £7.99 to non-members: RSGB PSK31 Kit at RSGB. Yopu’ll need to source the components, as these are not included in the RSGB kit, but you get the bits you need in kit form cheaply from Spectrum Communications.

Many thanks to David M0HBV, one of the training team at the Chelmsford Amateur Radio Society, for talking to us about the kit, and letting us have a try. According to David, this is a nice kit to build, and it’s very satisfying being able to put together an HF receiver this way. Here’s a picture of David’s finished board:

pskreceiver_02

The board is pre-tuned to 14.070MHz, which is the 20m centre of activity for PSK31, although a 30pF variable capacitor allows for a small amount of frequency adjusting. The kit was originally designed to be used with a Raspberry Pi (the £25 credit-card sized computer board) using a USB soundcard, but as our Raspberry Pi’s being used for other things, we didn’t want to reconfigure it for use with PSK, so instead connected the audio output to the mic in on a laptop:

RSGB Centenary Receiver board connected and running
RSGB Centenary Receiver board connected and running

The kit gets power from a 9V battery and has a 3.5mm audio out for connection to a soundcard. Connecting to the HF antenna can be with a crocodile clip to the board’s antenna connector, but David’s soldered a BNC socket making for easy connection – Note our rather crazy series of adapters used to go from BNC to PL259 (the correct adapter’s gone missing!)

Once all was connected, we fired up Digipan, which is a freeware PSK application. Our normal PSK app of choice is Ham Radio Deluxe, which is overkill for simple PSK reception. Digipan, however, is a small an efficient free app which decoded signals from the board nicely.

Digipan, showing PSK31 from the receiver
Digipan, showing PSK31 from the receiver

Thanks to David for bringing the board to our attention. This could be particularly useful for someone looking to get into RF kit construction, and also to play with HF data reception without the cost of an expensive shop-bought HF transceiver.

You can find more information on the PSK Receiver Project in the September 2013 issue of Radcom, or using the links on the RSGB site: RSGB Radcom Downloads

4 Comments

  1. Paul-M6PFX 30 September 2013 Reply
  2. Ben Schwabe 11 November 2015 Reply
    • Mark 26 May 2018 Reply
  3. mark hoey 13 June 2019 Reply

Leave a Reply to mark hoey Cancel reply

Your email address will not be published. Required fields are marked *